Chapter 1
Hardware Overview
©
National Instruments Corporation
1-5
Figure 1-4.
The AC Version Rear Panel
Side Panels
The GPIB connector and the serial connector are mounted on opposite side
panels. On the DC version, the DC power jack is located next to the serial
connector.
Figure 1-5 shows the location of the serial and GPIB connectors and the
DC power jack.
Figure 1-5.
Location of the Connectors and the DC Power Jack
OFF
ON
S MODE
DATA FORMAT
BAUD RATE
GPIB ADDRESS
G MODE
PO
WER
READ
Y
TALK LISTEN SRQ
AT
N
GPIB-232CT-A
IEEE 488 Controller
RS-232
Serial Connector
GPIB Connector
DC Power Jack
(DC version only)
