Basic Information
This section provides general information about the GPIB-140B.
Conventions
GPIB-140B
Refers to a GPIB extender that extends the GPIB to a maximum
distance of 1 km.
GPIB extender
Refers to the bus extender.
IEEE 488 and IEEE
488.2
Refers to the ANSI/IEEE Standard 488.1-1987 and the ANSI/
IEEE Standard 488.2-1992, respectively, which define the GPIB.
Kit Contents
•
A GPIB-140B bus extender
•
12 V DC power supply
This power adapter can be used with an input AC voltage between 100 V AC and
240 V AC. Verify that the voltage you will be using is in the input range of this power
adapter.
Note
If using a different adapter than what ships with the GPIB-140B, ensure
that the adapter provides 9 V DC to 15 V DC and has appropriate safety
certification marks for country of use.
Optional Equipment
The following table lists some cables available for the GPIB-140B. For a complete list of
GPIB accessories and ordering information, refer to the pricing section of the
Fiber-Optic
Cable
and
GPIB Cable
product pages at
Note
The GPIB-140B is designed for use with multi-mode fiber-optic cable. Do
not use with single-mode cable.
Table 1. GPIB-140B Optional Cables
Cable/Accessory
Part Number
GPIB T7 fiber-optic cable - extends up to 1 km
(10 m to 1000 m lengths)
182805-010/020/030/050/100/200/500/01K
Type X2 double-shielded cable with shielded
plug/receptacles
0.5 m: 763061-005
3 m: 763061-003
1 m: 763061-01
4 m: 763061-04
2 m: 763061-02
2
|
ni.com
|
GPIB-140B User Manual