National Instruments FlexRIO PXI-79 R Series, Installation Manual

Page: 3 / 17

NI FlexRIO FPGA Module Installation Guide 2 ni.com
Required Components
The following items are necessary to set up and use your NI FlexRIO system:
❑
The NI FlexRIO hardware device, comprised of the following items:
– NI FlexRIO FPGA module (PXI/PXIe-79 xx R)
– NI FlexRIO adapter module
Note
You can use the NI FlexRIO FPGA module without an adapter module for
coprocessing or peer-to-peer streaming. The adapter module installation instructions
in this document do not apply to these circumstances.
Table 1. NI FlexRIO Documentation Locations and Descriptions
Document Location Description
NI FlexRIO FPGA Module
Installation Guide and
Specifications
*
Available in your FPGA
module hardware kit and
from the Start Menu. Contains installation instructions for your
NI FlexRIO system and specifications for
your FPGA module.
NI FlexRIO Adapter
Module User Guide and
Specifications
*
Available from the Start
Menu. Contains signal information, examples,
and specifications for your adapter
module.
LabVIEW FPGA Module
Help
*
Embedded in LabVIEW
Help .
Contains information about the basic
functionality of LabVIEW FPGA Module.
NI FlexRIO Help
*
Available from the Start
Menu. Contains FPGA module, adapter module,
and CLIP configuration information.
LabVIEW Examples Available in LabVIEW
Example Finder. Contains examples of how to run FPGA
VIs and Host VIs on your device.
Other Useful Information on
ni.com
ni.com/ipnet Contains LabVIEW FPGA functions and intellectual property to share.
ni.com/flexrio
Contains product information and data sheets for NI FlexRIO devices.
*
These documents are also available at
ni.com/manuals
.