![background image](http://html1.mh-extra.com/html/national-instruments/fieldpoint-fp-1600/fieldpoint-fp-1600_user-manual_709182027.webp)
Chapter 3
Hardware and Software Configuration
©
National Instruments Corporation
3-5
FieldPoint FP-1600 User Manual
Figure 3-4.
Comm Resource Configuration Dialog Box
4.
To use the FP-1600, change the Type from RS232/485 to Ethernet.
Each Ethernet comm resource represents a single bank of FieldPoint
modules on the network.
5.
If you already know the device’s address, enter the address in the
Hostname
or IP Address field, then proceed to the section
If you do not know the address, click on Browse to locate the device.
The Network Devices window appears, as shown in Figure 3-5.