Chapter 4
Installing and Using the FieldPoint Software
©
National Instruments Corporation
4-15
6.
To verify that the data members were properly imported from your
configuration file, or to modify the parameters of the data members,
select
Object
»
Edit Database
from the menu bar, and double-click on
the FieldPoint object you just created. An object database window like
the one in Figure 4-7 appears.
Figure 4-7.
Modifying the FieldPoint Data Members
The
Configured Points
list should contain all of the I/O Items you
configured in FieldPoint Explorer. The
Eng. units
in the scaling window
indicate the configured range of analog I/O Items. From this window, you
can modify the alias, alarm conditions, and other parameters of each data
member in the FieldPoint object.
For more information about the FieldPoint driver object class and data
members, refer to the
National Instruments FieldPoint
information in your
Lookout documentation.