©
National Instruments Corp.
3
FP-RTD-124 and cFP-RTD-124
To install the cFP-RTD-124, refer to Figure 2 and complete the
following steps:
1. Align the captive screws on the cFP-RTD-124 with the holes
on the backplane. The alignment keys on the cFP-RTD-124
prevent backward insertion.
2. Press firmly to seat the cFP-RTD-124 on the backplane.
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
⋅
m
(10 lb
⋅
in.) of torque. The nylon coating on the screws
prevents them from loosening.
Figure 2.
Installing the cFP-RTD-124
1
cFP Backplane
2
cFP Controller Module
3
cFP I/O Module
4
Captive Screws
5
Screw Holes
4
4
3
2
1
5
5
