Chapter 4
LabVIEW RT Programming
cFP-20xx and cFP-BP-x User Manual
4-4
ni.com
RT Target: Access
Use
RT Target: Access
options to limit which host PCs can target the
RT Engine on the cFP-20
xx
.
Complete the following steps to open the RT Target: Access dialog box:
1.
Target LabVIEW RT to the cFP-20
xx
. Refer to the
section for more information.
2.
Select
Tools»RT Target:
x.x.x.x
: Options
, where
x.x.x.x
is the
IP address of the cFP-20
xx
.
3.
Select
RT Target: Access
from the pull-down menu to see the
following dialog box.
If the IP address of the host PC matches an entry that allows access, you can
target the cFP-20
xx
without providing a password, even if the module
configuration is locked. If the host IP address does not match any entry or
matches an entry that denies access, you must provide the correct password
to target the cFP-20
xx
.