INSTALLATION GUIDE
FBUS-HSE/H1 LD
Fieldbus Network Module Linking Device
This document provides a quick guide to install and configure
the FBUS-HSE/H1 LD network module. For more detailed
information on using the network module, refer to the
FBUS-HSE/H1 Linking Device (LD) User Manual
.
Features
•
Foundation Fieldbus H1 interface to control network
•
High Speed Ethernet interface
•
Runs on 11 to 30 VDC power
•
0 to +55 °C operation
Kit Contents and Optional Equipment
Your kit contains the following items:
•
FBUS-HSE/H1 LD network module
•
Accessories—This installation guide and your software CD
You can order the following optional equipment from National
Instruments:
•
Panel mount accessory, part number 777609-01
•
Cables
•
24 VDC power supply
Installation
Complete the following steps to install the FBUS-HSE/H1 LD.
1. Use a flat-bladed screwdriver to open the DIN rail clip to the
unlocked position, as shown in Figure 1.
