ExpressCard Strain-Relief Assembly Installation Guide
2
ni.com
To secure only an ExpressCard, refer to Figure 1 and follow these steps:
1.
Install an ExpressCard in the controller ExpressCard slot.
2.
Using the provided hex key, attach the security bracket in its rightmost
position to the controller front panel with the hex socket screws.
Figure 1.
Securing Only an ExpressCard
To remove the ExpressCard, loosen but do not remove the screws. Slide the
security bracket to the left and remove the ExpressCard.
1
Hex Socket Screw (2x)
2
Security Bracket
1
2
RESET
10/100
/1000
ACT/LINK
TRIG
DRIVE
PWR OK
