Getting Started with Your Serial Device Server
4
ni.com
c. Click
OK
to finish. The
VISA Configuration
window should now show
the new static addition(s) under the
Ethernet Serial
node.
d. Exit
VISA Configuration
. If you see the question
D
o you wish to
commit all your changes to VISA?
, answer
Yes
.
7. To verify hardware and software installation, run
NIvisaic
, which is in
the
NIvisa
subdirectory of your installation.
NIvisaic
attempts to open
and close each port. If the test is successful, all ENET-Serial ports are under
the
ASRL0 (ENET/Serial)
node; there are none under the
Unknown
node.
If there is a failure, select any ENET-Serial port under the
Unknown
node and
press
Enter
. This brings up a dialog box with a diagnostic message with more
information on the error source. To troubleshoot the problem, refer to
Appendix C,
Troubleshooting and Common Questions
, in the
NI ENET-Serial
User Manual
.
8. Connect the serial devices to the serial ports.
9. For further information, see the
NI ENET-Serial User Manual
.
1
Serial Ports 1 and 2
2
Serial Ports 3 and 4 (on 4-Port Models Only)
1
2
