6-4
|
ni.com
Chapter 6
Digital I/O
Digital Waveform Acquisition
Figure 6-2 summarizes all of the timing options provided by the digital input timing engine.
Figure 6-2.
Digital Input Timing Options
You can acquire digital waveforms on the Port 0 DIO lines. The DI waveform acquisition FIFO
stores the digital samples. X Series devices have a DMA controller dedicated to moving data
from the DI waveform acquisition FIFO to system memory. The DAQ device samples the DIO
lines on each rising or falling edge of a clock signal, DI Sample Clock.
You can configure each DIO line to be an output, a static input, or a digital waveform acquisition
input.
X Series devices feature the following digital input timing signals:
•
*
•
DI Sample Clock Timebase Signal
•
•
*
•
*
Signals with an
*
support digital filtering. Refer to the
, for
more information.
DI Sample Clock Signal
The device uses the DI Sample Clock (di/SampleClock) signal to sample the Port 0 terminals
and store the result in the DI waveform acquisition FIFO.
You can specify an internal or external source for DI Sample Clock. You can also specify
whether the measurement sample begins on the rising edge or falling edge of DI Sample Clock.
Revamp AO timing options with DI timebase and clocks
PFI, RT
S
I
PXI_
S
TAR
An
a
log Comp
a
ri
s
on
Event
20 MHz Time
bas
e
100 kHz Time
bas
e
PXI_CLK10
Progr
a
mm
ab
le
Clock
Divider
DI
Sa
mple Clock
Time
bas
e
PFI, RT
S
I
PXI_
S
TAR
An
a
log Comp
a
ri
s
on Event
Ctr
n
Intern
a
l O
u
tp
u
t
DI
Sa
mple Clock
100 MHz Time
bas
e
D
S
TAR <A..B>
D
S
TAR <A..B>
Summary of Contents for DAQ X NI 634 Series
Page 1: ...PXIe 6349...