Chapter 9
SC-2057
©
National Instruments Corporation
9-9
Table 9-1 describes the connectors on the SC-2057.
Table 9-1.
SC-2057 Connectors
Connectors
Connection
Description
P1
96-pin male DIN connector;
VXI-DIO-128 connection
Attach P1 or P2 to VXI-DIO-128.
P2
96-pin male DIN connector;
VXI-DIO-128 connection
Attach P1 or P2 to VXI-DIO-128.
J1
50-pin male ribbon cable connector;
Digital Ports 0–3 or 8–11
Attach J1 to 50-pin accessories as
shown in Figure 9-2.
J2
50-pin male ribbon cable connector;
Digital Ports 4–7 or 12–15
Attach J2 to 50-pin accessories as
shown in Figure 9-2.
J3
2-position terminal block; +24 V at
0.5 A connection
Use J3 when +24 V is needed.
J4
2-position terminal block; +12 V at
0.5 A connection
Use J4 when +12 V is needed.
J5
2-position terminal block; +5 V at 1 A
connection
Attach J5 to accessories if possible or
when +5 V is needed.
J6
2-position terminal block; +5 V at 1 A
connection
Attach J6 to accessories if possible or
when +5 V is needed.