Chapter 2
SC-2050
©
National Instruments Corporation
2-7
Figure 2-6.
Pin Assignments for SC-2050 Digital I/O Connector J5
Mounting
The SC-2050 adapter is equipped with metal standoffs so it can sit on a
workbench close to the host computer. A rack-mount chassis is also
available and can be fitted with a flat acrylic plastic cover, or a metal
wraparound cover. To ground the SC-2050 adapter to the chassis, set the
jumper on the adapter as described in Chapter 10,
.
Cabling
You need a 50-pin ribbon cable to connect the SC-2050. Connections to the
SC-206X Series boards require a 26-pin ribbon cable. A 26-conductor
ribbon cable is needed for the 8-channel SSR backplane. Additional cables
are available from National Instruments for connection to other
accessories.
+5 V
DIO0
DIO1
DIO2
DIO3
DIO4
DIO5
DIO6
DIO7
+5 V
+5 V
+5 V
+5 V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
9
10
7
8
5
6
3
4
1
2
