National Instruments DAQ M Series User Manual Download Page 3

 

Important Information

Warranty

The NI USB-6210, NI USB-6211, NI USB-6212, NI USB-6215, NI USB-6216, and NI USB-6218 are warranted against defects in materials 
and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other doc

u

mentation. National Instr

u

ments 

will, at its option, repair or replace eq

u

ipment that proves to be defective d

u

ring the warranty period. This warranty incl

u

des parts and labor. 

The media on which yo

u

 receive National Instr

u

ments software are warranted not to fail to exec

u

te programming instr

u

ctions, d

u

e to defects in 

materials and workmanship, for a period of 90 days from date of shipment, as evidenced by receipts or other doc

u

mentation. National Instr

u

ments 

will, at its option, repair or replace software media that do not exec

u

te programming instr

u

ctions if National Instr

u

ments receives notice of s

u

ch defects 

d

u

ring the warranty period. National Instr

u

ments does not warrant that the operation of the software shall be 

u

ninterr

u

pted or error free.

A Ret

u

rn Material A

u

thorization (RMA) n

u

mber m

u

st be obtained from the factory and clearly marked on the o

u

tside of the package before any 

eq

u

ipment will be accepted for warranty work. National Instr

u

ments will pay the shipping costs of ret

u

rning to the owner parts which are covered by 

warranty.

National Instr

u

ments believes that the information in this doc

u

ment is acc

u

rate. The doc

u

ment has been caref

u

lly reviewed for technical acc

u

racy. In 

the event that technical or typographical errors exist, National Instr

u

ments reserves the right to make changes to s

u

bseq

u

ent editions of this doc

u

ment 

witho

u

t prior notice to holders of this edition. The reader sho

u

ld cons

u

lt National Instr

u

ments if errors are s

u

spected. In no event shall National 

Instr

u

ments be liable for any damages arising o

u

t of or related to this doc

u

ment or the information contained in it.

E

XCEPT

 

AS

 

SPECIFIED

 

HEREIN

, N

ATIONAL

 I

NSTRUMENTS

 

MAKES

 

NO

 

WARRANTIES

EXPRESS

 

OR

 

IMPLIED

AND

 

SPECIFICALLY

 

DISCLAIMS

 

ANY

 

WARRANTY

 

OF

 

MERCHANTABILITY

 

OR

 

FITNESS

 

FOR

 

A

 

PARTICULAR

 

PURPOSE

. C

USTOMER

S

 

RIGHT

 

TO

 

RECOVER

 

DAMAGES

 

CAUSED

 

BY

 

FAULT

 

OR

 

NEGLIGENCE

 

ON

 

THE

 

PART

 

OF

 N

ATIONAL

 

I

NSTRUMENTS

 

SHALL

 

BE

 

LIMITED

 

TO

 

THE

 

AMOUNT

 

THERETOFORE

 

PAID

 

BY

 

THE

 

CUSTOMER

. N

ATIONAL

 I

NSTRUMENTS

 

WILL

 

NOT

 

BE

 

LIABLE

 

FOR

 

DAMAGES

 

RESULTING

 

FROM

 

LOSS

 

OF

 

DATA

PROFITS

USE

 

OF

 

PRODUCTS

OR

 

INCIDENTAL

 

OR

 

CONSEQUENTIAL

 

DAMAGES

EVEN

 

IF

 

ADVISED

 

OF

 

THE

 

POSSIBILITY

 

THEREOF

. This limitation of 

the liability of National Instr

u

ments will apply regardless of the form of action, whether in contract or tort, incl

u

ding negligence. Any action against 

National Instr

u

ments m

u

st be bro

u

ght within one year after the ca

u

se of action accr

u

es. National Instr

u

ments shall not be liable for any delay in 

performance d

u

e to ca

u

ses beyond its reasonable control. The warranty provided herein does not cover damages, defects, malf

u

nctions, or service 

fail

u

res ca

u

sed by owner’s fail

u

re to follow the National Instr

u

ments installation, operation, or maintenance instr

u

ctions; owner’s modification of the 

prod

u

ct; owner’s ab

u

se, mis

u

se, or negligent acts; and power fail

u

re or s

u

rges, fire, flood, accident, actions of third parties, or other events o

u

tside 

reasonable control.

Copyright

Under the copyright laws, this p

u

blication may not be reprod

u

ced or transmitted in any form, electronic or mechanical, incl

u

ding photocopying, 

recording, storing in an information retrieval system, or translating, in whole or in part, witho

u

t the prior written consent of National 

Instr

u

ments Corporation.

National Instr

u

ments respects the intellect

u

al property of others, and we ask o

u

u

sers to do the same. NI software is protected by copyright and other 

intellect

u

al property laws. Where NI software may be 

u

sed to reprod

u

ce software or other materials belonging to others, yo

u

 may 

u

se NI software only 

to reprod

u

ce materials that yo

u

 may reprod

u

ce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

National Instr

u

ments, NI, ni.com, and LabVIEW are trademarks of National Instr

u

ments Corporation. Refer to the 

Terms of Use

 section 

on

ni.com/legal

 for more information abo

u

t National Instr

u

ments trademarks.

Other prod

u

ct and company names mentioned herein are trademarks or trade names of their respective companies.

Members of the National Instr

u

ments Alliance Partner Program are b

u

siness entities independent from National Instr

u

ments and have no agency, 

partnership, or joint-vent

u

re relationship with National Instr

u

ments.

Patents

For patents covering National Instr

u

ments prod

u

cts/technology, refer to the appropriate location: 

Help»Patents

 in yo

u

r software, 

the

patent

s

.txt

 file on yo

u

r media, or the 

National Instruments Patent Notice

 at 

ni.com/patent

s

.

WARNING REGARDING USE OF NATIONAL INSTRUMENTS PRODUCTS

(1) NATIONAL INSTRUMENTS PRODUCTS ARE NOT DESIGNED WITH COMPONENTS AND TESTING FOR A LEVEL OF 
RELIABILITY SUITABLE FOR USE IN OR IN CONNECTION WITH SURGICAL IMPLANTS OR AS CRITICAL COMPONENTS IN 
ANY LIFE SUPPORT SYSTEMS WHOSE FAILURE TO PERFORM CAN REASONABLY BE EXPECTED TO CAUSE SIGNIFICANT 
INJURY TO A HUMAN.

(2) IN ANY APPLICATION, INCLUDING THE ABOVE, RELIABILITY OF OPERATION OF THE SOFTWARE PRODUCTS CAN BE 
IMPAIRED BY ADVERSE FACTORS, INCLUDING BUT NOT LIMITED TO FLUCTUATIONS IN ELECTRICAL POWER SUPPLY, 
COMPUTER HARDWARE MALFUNCTIONS, COMPUTER OPERATING SYSTEM SOFTWARE FITNESS, FITNESS OF COMPILERS 
AND DEVELOPMENT SOFTWARE USED TO DEVELOP AN APPLICATION, INSTALLATION ERRORS, SOFTWARE AND HARDWARE 
COMPATIBILITY PROBLEMS, MALFUNCTIONS OR FAILURES OF ELECTRONIC MONITORING OR CONTROL DEVICES, 
TRANSIENT FAILURES OF ELECTRONIC SYSTEMS (HARDWARE AND/OR SOFTWARE), UNANTICIPATED USES OR MISUSES, OR 
ERRORS ON THE PART OF THE USER OR APPLICATIONS DESIGNER (ADVERSE FACTORS SUCH AS THESE ARE HEREAFTER 
COLLECTIVELY TERMED “SYSTEM FAILURES”). ANY APPLICATION WHERE A SYSTEM FAILURE WOULD CREATE A RISK OF 
HARM TO PROPERTY OR PERSONS (INCLUDING THE RISK OF BODILY INJURY AND DEATH) SHOULD NOT BE RELIANT SOLELY 
UPON ONE FORM OF ELECTRONIC SYSTEM DUE TO THE RISK OF SYSTEM FAILURE. TO AVOID DAMAGE, INJURY, OR DEATH, 
THE USER OR APPLICATION DESIGNER MUST TAKE REASONABLY PRUDENT STEPS TO PROTECT AGAINST SYSTEM FAILURES, 
INCLUDING BUT NOT LIMITED TO BACK-UP OR SHUT DOWN MECHANISMS. BECAUSE EACH END-USER SYSTEM IS 
CUSTOMIZED AND DIFFERS FROM NATIONAL INSTRUMENTS' TESTING PLATFORMS AND BECAUSE A USER OR APPLICATION 
DESIGNER MAY USE NATIONAL INSTRUMENTS PRODUCTS IN COMBINATION WITH OTHER PRODUCTS IN A MANNER NOT 
EVALUATED OR CONTEMPLATED BY NATIONAL INSTRUMENTS, THE USER OR APPLICATION DESIGNER IS ULTIMATELY 
RESPONSIBLE FOR VERIFYING AND VALIDATING THE SUITABILITY OF NATIONAL INSTRUMENTS PRODUCTS WHENEVER 
NATIONAL INSTRUMENTS PRODUCTS ARE INCORPORATED IN A SYSTEM OR APPLICATION, INCLUDING, WITHOUT 
LIMITATION, THE APPROPRIATE DESIGN, PROCESS AND SAFETY LEVEL OF SUCH SYSTEM OR APPLICATION.

Summary of Contents for DAQ M Series





















Reviews: