cRIO-FRC with all external components removed
2.
Place the cRIO-FRC face down on the ESD mat. Using the #1 Philips screwdriver, remove the
eight screws that secure the back plate to the chassis (Note: Take care to apply moderate
downward force and work slowly to reduce the risk of damaging the cross recesses in the screw
heads). Place the screws in a safe place like a Ziploc® bag or other sealable container.
Removing the screws
3.
Keeping the cRIO-FRC facing downward, use one hand to gently press on the serial connector to
raise the back plate and PCB board and use your other hand to lift off and set aside the back
plate.
Summary of Contents for cRIO-FRC
Page 10: ......
