©
National Instruments Corporation
3
Rack Mounting Kit with DIN Rail for CompactRIO and CompactDAQ
3.
Clip the chassis and DIN rail clip assembly to the DIN rail, as shown in Figure 3.
Figure 3.
Attaching the DIN Rail Clip to the DIN Rail
4.
Make all necessary electrical connections as decribed in the controller, chassis, and I/O module
documentation. Route all cables through the openings in rear surface of the bracket.
5.
Connect the chassis ground wire to the bracket grounding screw. Refer to Figure 5 for the location
of the bracket grounding screw.
6.
Install the top and bottom covers as shown in Figure 4.
Figure 4.
Installing the Top and Bottom Covers
1
DIN Rail Clip
2
DIN Rail Spring
3
DIN Rail
3
2
1
Summary of Contents for cRIO-908 Series
Page 1: ...cRIO 9082...
