National Instruments CompactRIO sbRIO-9603 Hardware Installation Manual Download | Manualshive

Page: 25 / 60

background image

STATUS LED Indicators

Table 15. STATUS LED Indicators

LED Pattern

Indication

Blinks twice and
pauses

The sbRIO-96xx is in safe mode. Software is not installed, which is
the factory default state, or software has been improperly installed on
the sbRIO-96xx.

An error can occur when an attempt to upgrade the software is
interrupted. Reinstall software on the sbRIO-96xx. Refer to the

Measurement & Automation Explorer (MAX) Help

for information

about installing software on the sbRIO-96xx.

Blinks three times
and pauses

The sbRIO-96xx is in user-directed safe mode, or the sbRIO-96xx is
in install mode to indicate that software is currently being installed.

This pattern may also indicate that the user has forced the sbRIO-96xx
to boot into safe mode by pressing the reset button for longer than five
seconds or by enabling safe mode in MAX. Refer to the

Measurement

& Automation Explorer (MAX) Help

for information about safe mode.

Blinks four times
and pauses

The sbRIO-96xx is in safe mode. The software has crashed twice
without rebooting or cycling power between crashes.

Continuously blinks The sbRIO-96xx has not booted into NI Linux Real-Time. The

sbRIO-96xx either booted into an unsupported operating system, was
interrupted during the boot process, or detected an unrecoverable
software error.

On momentarily

The sbRIO-96xx is booting. No action required.

Off

The sbRIO-96xx is in run mode. Software is installed and the
operating system is running.

User LEDs

Note

You can define the USER1 and USER FPGA1 LEDs to meet the needs of

your application.

CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual

|

© National Instruments

|

25

«
...
23
24
25
26
27
...
»

Summary of Contents for CompactRIO sbRIO-9603





























































Reviews:

No comments

Related manuals for CompactRIO sbRIO-9603

Brand: Sole Diesel Pages: 8

Brand: M-Audio Pages: 26

Brand: M Climate Pages: 12

Brand: RADEMACHER Pages: 48

Brand: Vaillant Pages: 32

Brand: Vaillant Pages: 27

Brand: Vaillant Pages: 40

Brand: Vaillant Pages: 36

Brand: Vaillant Pages: 28

Brand: Vaillant Pages: 92

Brand: Partizan Pages: 7

Brand: Grundfos Pages: 80

Brand: Pacostar Pages: 55

XDOM TAKE 6 IR/RF - PRODUCTSHEET

Brand: Ebode Pages: 88

Brand: Lumel Pages: 32

Series RHCN-7000

Brand: Omega Engineering Pages: 2

xComfort CHSZ-12/03

Brand: Eaton Pages: 4

Brand: WAM Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands