For information about configuring specific server and device settings, browse to
http://
serverHostname
:81
and click
Help
to launch the
NI InsightCM Server
Configuration and Monitoring Help
.
Useful Resources
For a complete list of documentation for NI InsightCM Enterprise, visit
ni.com/info
and
enter the Info Code
insightcmdocs
.
Services & Support
ni.com/services
CompactRIO Specifications and Module Pinouts
Visit
ni.com/info
and enter
insightcmdocs
AI1
AI2
AI3
AI4
AI5
1
2
3
4
5
NI CMS-9024 and CMS-9068
Quick Start
NI Condition Monitoring Systems for NI InsightCM™
Enterprise
376270A-01 Nov14
©
2014
National Instruments
All rights reserved.
Caution
Before installing your device, read all product
documentation to ensure compliance with safety, EMC, and
environmental regulations.
Documentation
Ethernet Cable
CMS-9024 or
CMS-9068
Blank USB Drive
Power Suppl
y
Screwdri
ver
What You Need
Connect the controller to an Ethernet netw
ork using Ethernet port 1 on the
controller front panel.
Use a standard Categor
y 5 (CAT-5) or bet
ter Ethernet cable to connect the controller
to an Ethernet hub.
Y ou can st
art setting up de
vices independently from NI InsightCM Server
. How
ever
, to
complete
the setup, NI InsightCM Ser
ver must be online.
The f
ollowing flo
wchart sho
ws
how the de
vice setup depends on NI InsightCM Ser
ver
.
This document prompts y
ou to complete the server
-related steps when necessary to
continue setting up the de
vice.
1 . T
his document assumes the device is mounted as desired. F
or physical dimensions and
mounting instructions, ref
er to the
Maintaining Hardw
are
document, available b
y visiting
ni.com/info
and entering
insightcmdocs
.
2. This document assumes the
device
is unwired. If the
device
is already connected to
the net
work, a po
wer source, and sensors, proceed to step 4.
1 1
Where to Go Next
Connect to Network
Before You Begin
Soft
ware
installation
Device added
to server
Verify device
and prepare for
provisioning
Additional system
configuration
NI InsightCM
Server Set
up
Connect to network
and sensors
Connect to power
Provision device
Verify connecti
vity
Device
Setup
Refer to the
NI Trademarks and Logo Guidelines
at
ni.com/trademarks
for more information on National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their
respective companies. For patents covering National Instruments products/technology, refer to the appropriate
location:
Help»Patents
in your software, the
patents.txt
file on your media, or the
National Instruments
Patents Notice
at
ni.com/patents
. You can find information about end-user license agreements (EULAs) and
third-party legal notices in the readme file for your NI product. Refer to the
Export Compliance Information
at
ni.com/
legal/export-compliance
for the National Instruments global trade compliance policy and how to obtain relevant
HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE
ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S.
Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable
limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
