For inf
ormation about configuring specific server and de
vice settings, bro
wse to
http:/
/
serverHostname
:81
and click
Help
to launch the
NI InsightCM Server
Configuration and Monitoring Help
.
Useful Resources
For a complete list of document
ation for NI InsightCM Enterprise, visit
ni.com/info
and
enter the Info Code
insightcmdocs
.
Ser
vices & Support
ni.com/
ser
vices
CompactRIO Specifications and Module Pinouts
Visit
ni.com/info
and enter
insightcmdocs
AI1
AI2
AI3
AI4
AI5
1
2
3
4
5
NI CMS-9024 and CMS-9068
Quic
k S
tar
t
NI Condition Monitoring Systems f
or NI InsightCM™
Enterprise
376270A-01
Nov14
©
2014
National Instruments
All rights reserved.
Caution
Bef
ore installing y
our device, read all product
documentation to ensure compliance with saf
ety, EMC, and
environment
al regulations.
Documentation
Ethernet Cable
CMS-9024 or
CMS-9068
Blank USB Drive
Power Supply
Screwdriver
What You Need
Connect the controller to an Ethernet network using Ethernet port 1 on the
controller front panel.
Use a standard Category 5 (CAT-5) or better Ethernet cable to connect the controller
to an Ethernet hub.
You can start setting up devices independently from NI InsightCM Server. However, to
complete
the setup, NI InsightCM Server must be online. The following flowchart shows
how the device setup depends on NI InsightCM Server.
This document prompts you to complete the server-related steps when necessary to
continue setting up the device.
1. This document assumes the device is mounted as desired. For physical dimensions and
mounting instructions, refer to the
Maintaining Hardware
document, available by visiting
ni.com/info
and entering
insightcmdocs
.
2. This document assumes the device is unwired. If the device is already connected to
the network, a power source, and sensors, proceed to step 4.
11
Where to Go Next
Connect to Network
Before You Begin
Software
installation
Device added
to server
Verify device
and prepare for
provisioning
Additional system
configuration
NI InsightCM
Server Setup
Connect to network
and sensors
Connect to power
Provision device
Verify connectivity
Device
Setup
Refer to the
NI Trademarks and L
ogo Guidelines
at
ni.com/trademarks
for more information on National
Ins
tru
men
ts trademarks.
Other product and
company names mentioned herein are trademarks or trade names of their
respective companies. For patents covering National Instruments products/technology,
refer to the appropriate
location:
Help»Patents
in your software, the
patents.txt
file on
your media, or the
National Instruments
Patents Notice
at
ni.com/patents
. You can find information
about end-user license agreements (E
ULAs) and
third-party legal notices in the readme file for your NI product.
Refer to the
Export Compliance Information
at
ni.com/
legal/export-compliance
for the National Instruments global trade compliance policy and
how to obtain relevant
HTS codes,
ECCNs, and other import/export data. NI MAKES NO
EXPRESS OR IMPLIED WARRANTIES AS TO THE
ACCURACY OF THE
INFORMATION CONTAINED
HEREIN AND SHALL NOT
BE LIABLE FOR ANY ERRORS.
U.S.
Government Customers: The data contained
in this manual was developed at private expense and
is subject to the applicable
limited rights and
restricted
data rights as set forth in FAR 52.227-14, DFAR 252.227-7014,
and DFAR 252.227-7015.