INSTALLATION GUIDE
BNC-2115
Desktop and DIN Rail-Mountable BNC Adapter for E Series Devices
This installation guide describes how to install and configure your
BNC-2115 accessory. If you have not already installed your DAQ device,
refer to the
DAQ Quick Start Guide
for instructions.
The BNC-2115 is a desktop and DIN rail-mountable BNC adapter you
can connect to data acquisition (DAQ) devices. The BNC-2115 includes
24 BNC connectors and a two-position screw terminal.
The BNC-2115 has one 68-pin connector on the rear panel to connect to
your DAQ device.The 68-pin I/O connector connects to the extended
analog input of 64-channel Multifunction DAQ devices and the extended
digital I/O (DIO) of Multifunction DAQ devices. The BNC-2115 is ideal
for simplifying connections between your measurement apparatus and your
DAQ device in laboratory, test, and production environments.
What You Need to Get Started
To set up and use your BNC-2115 accessory, you need the following:
❑
BNC-2115 BNC adapter
❑
BNC-2115 Installation Guide
❑
SH1006868 cable
❑
One of the following Multifunction DAQ devices:
–
NI PCI-6033E
–
NI PCI/PXI-6025E
–
NI PCI/PXI-6031E
–
NI PCI/PXI-6071E
–
NI AT-MIO-64E-3
–
NI AT-MIO-16DE-10
