BNC-2111 Installation Guide
10
ni.com
Connecting Analog Output and PFI Signals
Connect each AO signal to the appropriate BNC connector
(AO Channels 0–1).
Use the BNC connectors to connect or access PFI signals on your DAQ
device. Figure 4 shows these connections. Refer to Table 6 in the
Figure 4.
AO and PFI Connections
AO 0
AO 1
APFI 0
PFI 0/P1.0
PFI 2/P1.2
PFI 7/P1.7
PFI 12/P2.4
PFI 13/P2.5
AO GND
D GND
