INSTALLATION GUIDE
BNC-2110
Desktop and DIN Rail-Mountable BNC Adapter
for Multifunction DAQ Devices
This installation guide describes how to install and configure your
BNC-2110 accessory with an E Series, S Series, or NI 671
X
/673
X
waveform generation Multifunction DAQ device.
The BNC-2110 is a desktop and DIN rail-mountable BNC adapter you
can connect to data acquisition (DAQ) devices. The BNC-2110 includes
15 BNC connectors, a terminal block with 30 pins for signal connections,
and a 68-pin I/O connector that connects to the E Series, S Series, and
waveform generation Multifunction DAQ devices. The BNC-2110 is ideal
for simplifying connections between your measurement apparatus and your
DAQ device in laboratory, test, and production environments.
What You Need to Get Started
To set up and use your BNC-2110 accessory, you need the following:
❑
BNC-2110 BNC Adapter
❑
BNC-2110 Installation Guide
❑
Multifunction DAQ device and the appropriate cable
❑
Small flathead screwdriver (supplied)
For detailed specifications for the BNC-2110, refer to the
Specifications
section.
