BNC-2081 Board
Chapter 3
BNC-208X Series User Manual
3-6
© National Instruments Corporation
Note:
The power specifications pertain to the power supply of the host computer. The maximum
power consumption of the BNC-2081 board is a function of the signal conditioning components
installed. If the board is being powered from the host computer, the m5-V current is
fuse-limited to 750 mA.
Physical
Board dimensions (including standoffs)
7.9 by 4.9 by 1.725 in.
I/O connectors
Three 50-pin male ribbon-cable connectors
BNC connectors
15
Operating Environment
Temperature
0
°
to 70
°
C
Relative humidity
5% to 90% noncondensing
Storage Environment
Temperature
-55
°
to 125
°
C
Relative humidity
5% to 90% noncondensing
Board-to-Board Cabling
The BNC-2081 board directly connects to any of the data acquisition boards listed in Table 3-2.
Table 3-2. Data Acquisition Boards Used with the BNC-2081 Board
Lab Board
(PC/XT and Macintosh NuBus)
BNC-2081 Board
Lab-LC
Lab-NB
Lab-PC
Lab-PC+
The BNC-2081 board directly connects to the Lab-PC, Lab-PC+ and Lab-NB using the 50-pin NB1
cable supplied with the BNC-2081. The Lab-LC board connects to the BNC-2081 using an NB10 cable,
available separately.
