Programming
Chapter 4
AT-MIO-16D User Manual
4-88
© National Instruments Corporation
Bit
Name
Description (continued)
6
INTE1
Interrupt enable bit for output. If this bit is set, DIO interrupts are
enabled from the 82C55A for OBFA*. Controlled by bit set/reset
of PC6.
5
IBFA
Input buffer full. High indicates that data has been loaded into the
input latch of Port A.
4
INTE2
Interrupt enable bit for input. If this bit is set, DIO interrupts are
enabled from the 82C55A for IBFA. Controlled by bit set/reset of
PC4.
3
INTRA
Interrupt request status. If INTE1 is high and IBFA is high, this bit
is high, indicating that a DIO interrupt request is asserted for input
transfers. If INTE2 is high and OBFA* is high, this bit is high,
indicating that a DIO interrupt request is asserted for output
transfers.
2, 1, 0
I/O
Extra I/O status lines available if Port B is not configured for
Mode 1.
At the DIO-24 I/O connector, Port C has the following pin assignments when in Mode 2.
OBFA*
PC7
PC6
PC5
PC4
PC3
PC2
PC1
PC0
STBA*
INTRA
I/O
IBFA
Group A
ACKA*
I/O
I/O
Mode 2 Programming Example
Main() {
#define BASE_ADDRESS
0x210
/* Board located at address 210. */
#define PORTAoffset
0x00
/* Offset for Port A */
#define PORTBoffset
0x01
/* Offset for Port B */
#define PORTCoffset
0x02
/* Offset for Port C */
#define CNFGoffset
0x03
/* Offset for CNFG */
register unsigned int porta, portb, portc, cnfg;
char valread;
/* Variable to store data read from a
port */
/* Calculate register addresses. */
porta = BASE_A PORTAoffset;
portb = BASE_A PORTBoffset;
portc = BASE_A PORTCoffset;
cnfg = BASE_A CNFGoffset;
Summary of Contents for AT-MIO-16D
