Getting Started with NI 9512 and P7000 Drives
|
© National Instruments
|
3
Ethernet connection and cable
P70360 or P70530 stepper drive
DC power supply if using the P70530 stepper drive
NI or third-party stepper motor
Note
Stepper motors available from NI are matched to the P7000 series stepper
drive. Refer to
ni.com/motion
for motor options. National Instruments highly
recommends using these motors for the best user experience.
NI or third-party encoder (optional)
RS-232 serial communication cable for P7000 drives (optional)
Figure 1 shows the required hardware and software.
Figure 1.
Required Hardware and Software for NI 9512 Drive Interface Module
Related Documentation
The following documents contain additional information that you may find helpful. All
referenced documents ship with the product and are available at
ni.com/manuals
.
•
Operating instructions for the controller and NI 9512 C Series module.
•
P70360 (AC) High Performance Micro-stepping Drive Reference Guide
—Use this
document to learn additional information about the electrical and mechanical aspects of the
P70360 AC stepper drive, including important safety information.
•
P70530 (DC) High Performance Micro-stepping Drive Reference Guide
—Use this
document to learn additional information about the electrical and mechanical aspects of the
P70530 DC stepper drive, including important safety information.
•
Getting Started with NI 951x C Series Modules and LabVIEW
—Use this document to learn
about using the NI 951x modules with LabVIEW, including information about the
P7000
S
erie
s
S
tepper Drive
(P70
3
60
s
hown)
NI
S
tepper
Motor
s
P7000
Direct Connect
C
a
ble
Ethernet
C
a
ble
NI RT Controller
(NI cRIO-9014
s
hown)
a
nd NI 9512 Mod
u
le
R
S
-2
3
2 C
a
ble
(Option
a
l)
+24 V Power
Su
pply
(NI P
S
-15
S
hown)
DC Power
Su
pply
(P705
3
0 only)
