Table 2. Crimp Tools for Building Your Own Cables
Description
Molex Part
Number
Supported Wire
AWG
Hand Crimp Tool for Ultra-
Fit Tangless Crimp
Terminals, 20-22 AWG
(UL1061) Wire
2002184700
22 AWG to 20 AWG
Hand Crimp Tool for Ultra-
Fit Tang-less Crimp
Terminals, 16-18 AWG
(UL1061) Wires
2002184600
18 AWG to 16 AWG
In addition to the provided connector housings, you will need the
following parts for each cable. The Ultra-Fit housing leaves the
crimps exposed at the rear of the housing. NI recommends
insulating the back of the connector with 25 mm (1.0 in.)
diameter heat shrink.
4
|
ni.com
|
NI 9470 Getting Started Guide