©
National Instruments Corp.
7
NI 9213E Operating Instructions and Specifications
Connecting Wires to the NI 9213E Connector
Use a flathead screwdriver with a blade smaller than 2.3 × 1.0 mm
(0.09 × 0.04 in.) to connect wires to the detachable spring-terminal
connector. Insert the screwdriver into a spring clamp activation slot
and press a wire into the corresponding connector terminal, then
remove the screwdriver to clamp the wire into the terminal. Refer
to the
section for more information about
spring-terminal wiring. Refer to Figure 4 for an illustration of
connecting wires to the NI 9213E.
Figure 4.
Connecting Wires to the NI 9213E Connector
