You must use these screws because they are the correct depth and thread for the panel.
Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
Figure 5.
Installing the Panel Mount Accessory on the NI 9148
Figure 6.
Dimensions of NI 9148 with Panel Mount Accessory Installed
31.8 mm
(1.25 in.)
15.5 mm
(0.61 in.)
9.5 mm
(0.38 in.)
28.1 mm
(1.11 in.)
63.5 mm
(2.50 in.)
88.1 mm
(3.47 in.)
311.2 mm
(12.25 in.)
330.2 mm
(13.00 in.)
NI 9148
POWER
USER FPGA1
STATUS
SAFE MODE
IP RESET
INPUT
19-30 V
20 W MAX
LINK
10/
100
V
C
NC
C
2.
Fasten the NI 9905 panel to the wall using the screwdriver and screws that are
appropriate for the wall surface. The maximum screw size is M4 or number 8.
Caution
Make sure that no I/O modules are in the chassis before removing it
from the panel.
Mounting the Chassis on a DIN Rail
You can order the NI 9915 DIN rail mount kit to mount the NI 9148 on a DIN rail. You need
one clip for mounting the chassis on a standard 35 mm DIN rail. Complete the following steps
to mount the chassis on a DIN rail.
6
|
ni.com
|
NI 9148 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
