©
National Instruments Corporation
5
Getting Started with the NI 783xR
PCI-783
x
R with the LabVIEW Real-Time Module
(ETS)
The following items are necessary to set up and use the PCI-783
x
R with the
LabVIEW Real-Time Module for ETS:
❑
PCI-783
x
R.
❑
The following software packages:
–
LabVIEW 7.1 or later.
–
LabVIEW FPGA Module 1.1 or later—required to develop
custom FPGA VIs.
–
LabVIEW Real-Time Module for ETS 7.1 or later.
–
NI-RIO 1.3 or later—included with the PCI-783
x
R.
–
Ardence (formerly Venturcom) Phar Lap Embedded Tool Suite
(ETS).
Note
The PCI-7831R supports NI-RIO 1.1 or later.
❑
Host computer running Windows 2000/XP for developing your
application.
❑
Target computer running the Phar Lap ETS real-time operating
system.
❑
At least one cable and device for connecting signals to the PCI-783
x
R.
PCI-783
x
R with the LabVIEW Real-Time Module
(RTX)
The following items are necessary to set up and use the PCI-783
x
R with the
LabVIEW Real-Time Module for RTX:
❑
PCI-783
x
R.
❑
The following software packages:
–
LabVIEW 7.1 or later.
–
LabVIEW FPGA Module 1.1 or later—required to develop
custom FPGA VIs.
–
LabVIEW Real-Time Module for RTX 7.1 or later.
–
NI-RIO 1.3 or later—included with the PCI-783
x
R.
–
Ardence (formerly Venturcom) RTX 5.5 or later.
