16
|
ni.com
|
Getting Started with NI Integrated Steppers and NI 73xx Motion Controllers
If the
V
and
Viso
LEDs do not illuminate, turn off all power, verify the connections, and
try again.
Note
Refer to the
Software Installation and Configuration
section after the
Connecting and Using the NI ISM-7400/7401/ 7402 with the NI UMI-7764
section to
continue setting up your system.
Connecting and Using the NI ISM-7400/7401/
7402 with the NI UMI-7764
What You Need to Get Started
You need the following items to get started.
Hardware
A computer with an available PXI or PCI slot
NI 7330, NI 7340, or NI 7350 motion controller
UMI-7764
SH68-C68-S cable to connect your NI UMI and motion controller
+5 V power supply for the UMI-7764
Snap-on ferrite bead for the power supply cable (included with your NI UMI-7764). Refer
to the
UMI-7764 User Guide and Specifications
for installation information.
NI PS-12 or NI PS-13 power supply for the NI integrated stepper
NI ISM-7400/7401/7402 integrated stepper
Software
NI-Motion 7.6 or later driver software
Tip
Refer to KB 4WRDJ3WA,
Which LabVIEW Version Supports NI-Motion?
, at
ni.com/kb
, for NI-Motion/LabVIEW version compatibility information.
One of the following software packages and documentation:
–
LabVIEW 8.5 or later
–
LabWindows/CVI 8.5 or later
–
Microsoft Visual C++ 6.0
–
Microsoft Visual Basic 6.0
