Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC) stated in the product specifications. These requirements and limits provide
reasonable protection against harmful interference when the product is operated in the intended
operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may occur in
some installations, when the product is connected to a peripheral device or test object, or if the product
is used in residential or commercial areas. To minimize interference with radio and television reception
and prevent unacceptable performance degradation, install and use this product in strict accordance
with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments could
void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution
To ensure the specified EMC performance, the length of all I/O cables must be no
longer than 3 m (10 ft).
