![background image](http://html1.mh-extra.com/html/national-instruments/1191/1191_user-manual_3488864022.webp)
Chapter 1
Installing and Configuring the SCXI-119X
SCXI-1190/1191/1192 User Manual
1-14
ni.com
1.
Turn off the SCXI chassis power.
2.
Remove all signals connected to the SCXI-119
X
.
Caution
Do
not
remove the SCXI-119
X
module from a chassis that is turned on because
doing so could damage the module.
3.
Rotate the thumbscrews securing the SCXI-119
X
to the chassis
counter-clockwise until they are loose, but do not completely remove
the thumbscrews.
4.
Remove the SCXI-119
X
by pulling steadily on both thumbscrews until
the module slides completely out.
Removing the SCXI-119
X
from Measurement & Automation Explorer
To remove a module from MAX, complete the following steps:
1.
Double-click the
Measurement & Automation Explorer
icon on
your PC desktop.
2.
Expand
Devices and Interfaces
. Locate the chassis in the list of
installed devices.
3.
Expand
Chassis
.
4.
Right-click on the module or chassis you want to delete and select
Delete
.
5.
You are presented a confirmation window. Click
Yes
to continue
deleting the module or chassis or click
No
to cancel this action.
Note
Deleting an SCXI chassis deletes all modules in the chassis. All configuration
information for these modules is also lost.
Your SCXI chassis and/or SCXI module(s) should now be removed from
the list of installed devices in MAX.