- Press push button B to end the
adjustment.
- Press push button A to turn on
the alarm. The alarm icon will
appear on the display.
Once the alarm starts beeping, it can be stopped by pressing
any button from any mode. The alarm beeps for 20 seconds
(one beep per second). If it is not stopped it will be repeated
after two minutes. The alarm icon will disappear after the alarm
has been stopped.
2.4 CHRONOGRAPH Mode
1) Measure of elapsed time
- Press push button C to switch
to CHRONOGRAPH mode.
- Press push button A to start
the chronograph.
- Press push button A to stop
the chronograph. The display
will show the elapsed time.
- To measure accumulated time,
start and stop the chronograph
several times.
- Press push button B to reset
the chronograph.
Note: The digital reading shows
the time elapsed in minutes,
seconds, and 1/100 seconds. If the
elapsed time is greater than 60
minutes, it will be displayed in
hours, minutes, and seconds.
D
A
C
B
11
