8
OPERATION
1. Press POWER button to turn on the detector. Press POWER again to power
off. LCD displays all symbols.
2. SETTING SENSITIVITY
Press SET, sensitivity level bar flashes. Then press UP button to increase the
sensitivity or press DOWN button to decrease it. After that, press ENTER to
confirm the setting.
3. SETTING VOLUME
Press SET three times, the volume icon flashes. Press UP button or DOWN
button to increase or decrease the volume level. Then press ENTER to
confirm the setting.
4. SETTING THE OPERATION MODE
The detector comes with three operating modes of ALL METAL, DISC,
PINPOINT.
a. ALL METAL – used for detecting all types of metal.
Press SET twice, then ENTER to get ALL METAL. In this mode, the unit can
detect all kinds of metal.
b. DISC – used for target discrimination. You can set the target range or
eliminate the target you don’t want by pressing SET and MODE buttons.
Press SET twice, the blank frame flashes, press UP or DOWN to choose the
target you don’t want. Then press MODE. You can choose several targets
to be eliminated. After that, press ENTER to confirm the selected target to
be eliminated. To pick up the eliminated items, simply press MODE before
pressing ENTER. Or repress SET twice and UP or DOWN to move the flashing
frame to the target you want to pick. Then press MODE or ENTER.
NOTE: A crossed frame is for items eliminated.
Summary of Contents for 80-20012
Page 15: ...15 ...