National Geographic 265NC, Manual

Page: 10 / 26

10
7. The wind direction arrow and the + and – buttons will start to fl ash. Touch the +
or – buttons to set the desired wind direction alarm. Touch the ON/OFF button to
enable or disable the alarm
8. Touch the WIND SPEED section to confi rm.
9. Once the wind speed and direction alarms are set, the maximum wind speed will be
displayed. To reset the maximum wind speed touch and hold the fl ashing maximum
value for 3 seconds, the value will reset to the current reading.
10. Touch the WIND SPEED section to confi rm.
1. Touch the RAIN section, + and – buttons will start to fl ash.
2. Touch the + or – buttons to switch between 1h, 24h, week, month and total
rainfall.
3. Touch the RAIN section to confi rm.
4. Touch the + or – buttons to select the rain measurement value in mm or inches.
5. Touch the RAIN section to confi rm.
9.1 Rain Alarm 9.1 Rain Alarm
6. The rain and high alarm icon (HI AL) will start to fl ash as well as the + and
– buttons.
7. Touch the + or – button to change the value, touch the ON/OFF button to enable
or disable the alarm. Touch the RAIN section to confi rm.
9.2 Rain Max 9.2 Rain Max
8. Once the rain alarm is set, the maximum rain will be displayed. To reset the
maximum rain touch and hold the fl ashing maximum value for 3 seconds, the value
will reset to the current reading.
9. Touch the RAIN section to confi rm.
10. Touch and hold the RAIN section to reset the rainfall value to 0 for 1h, 24h, week,
month and total rainfall.
1. Touch the PRESSURE section, + and – buttons will start to fl ash.
2. Touch the + or – buttons to switch between absolute pressure and relative air
3. Touch the PRESSURE section to confi rm.
4. Touch the + or – buttons to select the pressure measurement value in
hectopascals (hPa), inches of mercury (inHg), or millimeters of mercury (mmHg).
Touch the PRESSURE section to confi rm.
NOTE: NOTE: If relative air pressure is selected, REL will fl ash after pressure measurement
value is selected. To change the value of relative air pressure, touch the + or
– buttons and touch the PRESSURE section to confi rm.
5. The air pressure high alarm icon (HI AL) will start to fl ash as well as the + and
– buttons.
6. Touch the + or – button to change the value, touch the ON/OFF button to enable
or disable the alarm. Touch the PRESSURE section to confi rm.
7. Follow step 6 to set the air pressure low alarm (LO AL).