{
trOuBLesHOOtinG
prOBLems
causes
sOLutiOns
Motor fails to start after
being powered on.
• Power cable
disconnected.
• Battery is not charged.
• Damaged power switch.
• Dismantle base to
reconnect cables
• Charge battery.
• Replace switch.
Abnormal motor sound.
• Fastening screws of pump
are loose.
• Tighten screws.
Leakage occurring at
bottom of sprayer base.
• Inlet and/or outlet tubes of
pump are damaged or not
securely connected.
• Dismantle base and
tighten tube clamps,
and/or replace tubing.
Poor atomization
• Clogged spray nozzle.
• Spray nozzle worn out.
• Spray sheet inverted.
• Clogged filter screen.
• Tubes not securely
connected.
• Battery low on power.
• Air remaining in pump.
• Clean nozzle.
• Replace spray nozzle.
• Correct.
• Clean.
• Tighten.
• Alarm not working–
replace and recharge.
• Remove nozzle or spray
rod to discharge air.
