background image

Information Section 

- 4 - 

 

 

1.4 

Warranty 

 

National Flooring Equipment Inc. (referred to as “the Company”) warrants that each new unit manufactured 

by The Company, to be free from defects in material and workmanship in normal use and service for a 

period of twelve (12) months from date of shipment from the Company. For administrative ease, will honor 

warranty for a period of fifteen (15) months from date of shipment from the company. Accessories or 

equipment furnished and installed on the product by the Company but manufactured by others, including 

but not limited to: engines, motors, electrical components, transmissions etc., shall carry the accessory 

manufacturers own warranty. Battery warranties are prorated over the warranty period. Customer is 

responsible for the inspection of equipment / parts upon delivery. Freight damages reported beyond 

authorized time frame will not be honored. 

 

The Company, at its determination of defect, will repair or replace any product or part deemed to be 

defective in material or workmanship within specified warranty time period. All product determinations and 

/ or repairs will take place at the designated Company repair facility, or at a certified warranty location 

designated by the Company. The Company will coordinate and be responsible for all freight expenses 

associated with valid warranty claims. Freight and shipping expenses associated with abuse or misuse will 

be back charged to the Distributor/Customer. The Company reserves the right to modify, alter or improve 

any part / parts without incurring any obligation to replace any part / parts previously sold without such 

modified, altered or improved part / parts. In no event shall the seller or manufacturer of the product be 

liable for special, incidental, or consequential damages, including loss of profits, whether or not caused by 

or resulting from the negligence of seller and / or the manufacturer of the product unless specifically 

provided herein. This warranty shall not apply to any products or portions there of which have been 

subjected to abuse, misuse, improper installation or operation, lack of recommended maintenance, 

electrical failure or abnormal conditions and to products which have been tampered with, altered, 

modified, repaired, reworked by anyone not approved or authorized by the Company or used in any 

manner inconsistent with the provisions of the above or any instructions or specifications provided with or 

for the product. Any and all unauthorized onsite warranty work conducted by unauthorized personnel or 

any outside person(s), is not covered by the Company unless the work has been pre-authorized by a 

predetermined manufacturer representative. This excludes wearable parts and/or consumables. 

 

 Defective or failed material or equipment shall be held at the purchaser’s premises until authorization has 

been granted by the Company to return or dispose of defective products. Products returned for final 

inspection must be returned with a manufacturer authorized Return Material Authorization (RMA). Any 

unauthorized return of equipment will be declined at the dock by the Company. Any non-approved items 

returned with approved returned items are subject to rejection and will not be credited. Credit will be 

issued for material found to be defective upon the Company’s inspection based on prices at time of 

purchase. 

 

To obtain a Material Safety Data Sheet and/or a copy of the CE Declaration of Conformity please contact 

National. This product is CE compliant. 

 

TO OBTAIN SERVICE CONTACT NATIONAL FLOORING EQUIPMENT, INC. TOLL FREE AT 800-245-0267 FOR A 
REPAIR AUTHORIZATION NUMBER. COD FREIGHT RETURNS WILL NOT BE ACCEPTED. FREIGHT COLLECT 
SHIPMENTS WILL NOT BE ACCEPTED. WARRANTY REPAIRS MUST BE ACCOMPANIED BY DATE OF 
PURCHASE RECEIPT AND A RETURN/REPAIR AUTHORIZATION NUMBER. 
 

RETURN/REPAIR AUTHORIZATION NUMBER: _____________________________ 
MACHINE SERIAL NUMBER: ____________________________________________ 

 

 
 

Summary of Contents for DL3000























Reviews: