Confidential Page
8
6/23/2014
Activating the NFT-1175 Unit
Prior to the initial powering of the unit, move the vehicle outside, so that the GPS
receiver can receive signals from the GPS satellites.
Upon initial power up of the NFT-1175 the LEDs start flashing on the side of the
unit to determine if the unit is powered on. If the LED is not flashing after 60sec,
check the power connections. The statuses of the LED’s are below.
Status LED Definitions
Orange LED Status
GSM/GPRS Cellular Communications
Green LED Status
GPS Communications
Blinking – Tracker on, searching for wireless signal
Blinking – GPS on, searching for satellite
signal
Patterned Blinking – Signal acquired, unit trying to
establish connection to the communication server
Solid – 2-way communication link with the
communication server established
Solid – GPS lock established
After the unit has been powered for 5 to 15 minutes, the unit will send in a
“power-up” message.
While waiting for the power-up message, collect the following information before
calling in (855-438-4771 option2) for activating the unit:
Account ID
Vehicle Name
Device IMEI number
Please verify with tech support that the device has been activated and is working
properly before putting the unit back in service.
