National Electronics & Watch Co,. Ltd.
BC10
4.4)
Bring the GPS watch within range of the HRM transmitter (3 meters). The watch will auto
detect the HR belt. The watch will then automatically go to
RUN
mode. Your Heart rate
information will now be displayed in the watch.
4.5)
If the heart rate data does not appear on the watch, or if you have erratic data, follow the
tips below. If the problem persists, you may have to pair the HR belt again.
4.5.1)
Make sure the HR belt is snugly fit to your body.
4.5.2)
Reapply water or electrode gel to the electrode of the HR belt.
4.5.3)
Clean the electrodes from possible contamination that may interfere with heart
rate signals.
4.5.4)
Wear a cotton shirt or if possible, wet your cotton shirt. Synthetic fabric that rubs
with your skin may create static electricity and interfere with the heart rate
signal.
4.5.5)
Move away from strong electromagnetic fields and other wireless sensors which
can interfere with your heart rate sensor. Possible sources of wireless
interference may include high voltage power lines, electric motors, microwave
ovens, cordless phones, and wireless LAN or access points.
Step 5) Go for a Run:
5.1) Using Run mode:
5.5.1)
Press S1 or S7 from Time mode to go to RUN mode.
5.5.2)
The watch will automatically search for GPS signal. Once the signal is received,
the watch will prompt “GPS GO, PACE and the CHRONO time blinks.
5.5.3)
Press S1 to START or TAKE LAP. If auto lap function is set, the watch will take
lap automatically based on auto lap setting. And there is a beep sound during
taking of auto lap.
5.5.4)
Press S5 to stop after completing your run.
5.5.5)
Press & hold S5 again to save your run data.
Note: When the chronograph is stopped or reset, the GPS will automatically turn
OFF after 15 minutes and return to Time mode.
5.2) Using Chronograph mode:
RUN
mode and
CHRONOGRAPH
mode has the same timer counter. When the chronograph
is started or stopped in RUN mode, the same thing happens in Chronograph mode. They just
differ in the views. This mode is dedicated to chronograph, lap time, exercise time, and
distance travelled.
5.5.1)
Press S1 to START or TAKE LAP. If auto lap function is set, the watch will take
lap automatically based on auto lap setting. There is also a beep sound during
taking auto lap.
5.5.2)
Press S5 to stop after completing your run.
5.5.3)
Press & hold S5 again to save your run data.
Note: When the chronograph is stopped or reset or no key operation, the GPS will
automatically turn
OFF
after 15 minutes and return to time mode.
5.3) Using HRM mode:
RUN
mode and
HRM
mode has the same timer counter. When the chronograph is started or
stopped in RUN mode, the same thing happens in HRM mode. They just differ in the views.
This mode is dedicated to HRM views
5.3.1)
Press S5 or S7 from Time to HRM mode.
5.3.2)
Press S1 to START or TAKE LAP. If auto lap function is set, the watch will take
lap automatically based on auto lap setting. There is also a beep sound during
taking auto lap.
5.3.3)
Press S5 to stop after completing your run.
5.3.4)
Press and hold S5 again to save your run data.
Note: When the chronograph is stopped or reset, the GPS will automatically turn
off after 15 minutes and return to time mode.
Step 6) Download your data to PC:
The watch comes with PC software to make communication between your watch and PC
easy and enjoyable. Please install the PC software to your PC using the installer provided.
The watch is using a USB PC link cable to connect the watch to PC.
Run the GPS PC software on your PC. Plug the USB cable with the watch clamped in the
other end of the cable. PC software will then prompt you to download the data. Click the
download button to begin downloading. The PC software will prompt to delete the data in the
watch. User has the option to delete the data in the watch or not.
The PC software installation and instruction guide can be found at the end of this manual.
Please take time to read the guide.
General Operations
The watch has the following main modes: Time, Run, Chronograph, HRM, RUN Data, Timer
Alarm and Set modes. Press S7 to scroll through these modes.
