14
Instant
Wave High Speed
PCI/PC Card
p
step5.
Insert the Windows NT driver diskette into drive a (or b) and then type
a:\winnt
(or
b:\winnt
)
step6.
Click
OK
. The
Select OEM Option
dialog box will open.
step7.
Select the correct adapter and click
OK.
If
PC Card
is selected, the
dialog box for setting the Interrupt number and I/O address will be
shown. Users can specify a different Interrupt number and I/O address
for this adapter if there is a conflict with an existing card in the
computer
step8.
Click
OK
. The
InstantWave PCI Adapter Setup
dialog box will open.
Select the Network Type and Carrier Set. If the station is connected to
an Access Point,
Infrastructure mode
must be specified. Select
Ad Hoc
mode
to make a peer to peer connection to other wireless stations. If
the country of operation is different from the country in which the
product was purchased, the user can change the carrier set. All wireless
stations and Access Points must use the same Carrier Set in order to
communicate. The Domain name should be the same as the network
domain to which the station will be connected
step9.
Click
OK
. The
Roaming
dialog box will open.
step10.
When
Roaming
is enabled, the station is allowed to roam to another
Access Point under the same Domain Name whenever the radio signal
quality of the currently connected AP is below an acceptable level.
Click
OK
. The
Security
dialog box will appear.