1. HORIZONTAL AIM
A.
To adjust the Spotlights or Turnsignals right or left gently
rotate the lamp into the correct position. In the event that the
lamps become loose, refer to the procedure for vertical adjust-
ment.
2. VERTICAL AIM
A
. Loosen the nut on the Spotlight stud (Wrench 3/4”).
B
. Now, adjust the Spotlight.
C.
Firmly retighten the nut on the Spotlight stud.
D.
Adjust the Spotlights horizontally by rotating into position.
Page 2 of 2
10-110741-000 10/01
©2001 National Cycle, Inc. PO Box 158, Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / e mail: [email protected]
ADJUSTMENT
To adjust vertical aim you
will need these additional
tools:
Wrench 3/4”
MAINTENANCE
The high quality chrome finish of your National Cycle light
bar can be maintained with any quality chrome cleaner and
/or polish.
REPLACEMENT PARTS
Order replacement parts through your local dealer or contact
National Cycle.
N941
N941E
Description
Part No.
Part No.
Light Head Assembly
Right Side
90-910500-000
90-910502-000
Left Side
90-910500-000
90-910502-000
SealedBeam
Bulb Only For Above
90-901000-000
Lamp Assembly E13/DOT
Reflector, Lens and Bulb
90-901011-000
E
After wiring the light bar check for clearance. Make sure
the wires can not get pinched when the fork is turned to a
full fork lock left and right.
Check all lights for proper operation.
Check the tightness of all fasterners that have been
involved in this installation.
Installing optional N9005 Light Head Visor.
1.
Loosen the rim of the light head assembly. (Phillips Screw Driver).
2.
Slip taps of Visor under rim. Item E.
3.
Shape Visor / Visor Tabs to conform to contours of light head
assembly.
4.
Retighten rim.
