Electric Heat Kit Installation Instructions
3
ATTENTION INSTALLING PERSONNEL
CAUTION
Prior to installation, thoroughly familiarize yourself with this Installation
Manual. Observe all safety warnings. During installation or repair, caution
is to be observed. It is your responsibility to install the product safely and
to educate the customer on its safe use.
•
ENSURE THAT ALL POWER IS CONNECTED PRIOR TO ATTEMPTING
INSTALLATION OF THIS HEATER KIT. THERE MAY BE MORE THAN ONE
DISCONNECT SERVICING THE UNIT.
•
A MEANS OF STRAIN RELIEF AND CONDUCTOR PROTECTION MUST BE
PROVIDED AT THE SUPPLY WIRE ENTRANCE INTO CABINET.
•
USE COPPER CONDUCTORS ONLY.
•
INSTALLATION MUST FOLLOW NATIONAL ELECTRIC CODE AND OTHER
APPLICABLE CODES.
IF THIS APPLIANCE IS INSTALLED IN AN ENCLOSED AREA SUCH AS A
GARAGE OR UTILITY ROOM WITH ANY CARBON MONOXIDE PRODUCING
APPLIANCE, ENSURE THE AREA IS PROPERLY VENTILATED.
WARNING
After connect all wires, check all screws of breaker and make sure all
screws are properly tight.
Failure to do so will result in breaker malfunction, fire, death, personal
injury or property damage.
FIRE, ELECTRICAL SHOCK, HAZARD
Summary of Contents for 24-A
Page 7: ...7 Notes...
