background image

3

With the burner assembly removed, shine a flash light on 

9. 

the burner ribbons.  Look for carbon buildup, scale, dust, 

lint, and/or anything that might restrict flow through the 

spaces between the burner ribbons.  Holding the burner 

assembly so that any foreign material will fall away from 

the burner, use a stiff bristle brush to loosen and remove 

any foreign materials. 

If the burner is excessively dirty, remove one of the burner end 

caps. Remove the four screws that hold the end cap to the 

burner housing. Lightly tap the end cap to remove it. Clean all 

foreign material from the burner and venturi. After the burner is 

thoroughly clean, replace the end cap making certain that it is 

tight against the burner housing.

NOTE: 

If any of the burner components are damaged or 

deteriorated, replace the burner assembly.

ITEM

DESCRIPTION

PART NO.

1
2
3
4
5
6
7
8
9

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

Complete Furnace Assembly 38 Mbh

Complete Furnace Assembly 51Mbh

Complete Furnace Assembly 64 Mbh

Flame Rollout Switch

Orifice Adapter

Orifice Adaptor Lock Nut

DSI Electrode Assembly

Flame Sensor

DSI Integrated Control Board w/Cooling Relay

High Temperature Limit Thermostat

Pressure Switch

High Altitude Pressure Switch

Combination Gas Valve

Venter Tube Assembly

Venter Wheel Motor Assembly

Heat Exchanger Assembly - 38 Mbh
Heat Exchanger Assembly - 51 Mbh
Heat Exchanger Assembly - 64 Mbh

Full Burner Body Assembly - 38 Mbh

Full Burner Body Assembly -51 Mbh

Full Burner Body Assembly - 64 Mbh

Control Plug Assembly (9 wire)

Natural Gas Orifice - 38 Mbh
Natural Gas Orifice - 51 Mbh
Natural Gas Orifice - 64 Mbh

L.P. Gas Orifice - 38 Mbh
L.P. Gas Orifice - 51 Mbh
L.P. Gas Orifice - 64 Mbh

Control Plug Assembly (5 wire)

1/2” 90° Street Elbow Pipe

1/2” 90° Elbow Pipe

1/2” x 8” Black Pipe Threaded Both Ends

14208309
14208308
14208303
14208314
14208315
14208316
14208317
14208318
14208319
14208320
14208324
14208325
14208326
14208327
14208328
14208329
14208330
14208331
14208332
14208333
14208334
14208335
14208336
14208337
14208338
14208339
14208340
14208341
14208342
14208349
14208350
14208351

REPLACEMENT PARTS GUIDE     

      

For proper performance and 

safety, it is important that 

replacement parts be obtained 

from National Comfort Products.  

Please refer to the parts list at 

left for the part numbers:

National Comfort Products

539  Dunksferry Road

Bensalem, PA 19020

(215) 244-1400

1-800-523-7138

Fax: (215) 244-9579

VERIFY PROPER OPERATION AFTER SERVICING.

Summary of Contents for 14208309/HS038













Reviews: