5
Important Operating Instructions
1.
Press the air chuck onto the fill stem of the inflatable item.
2.
Turn the red adjustment dial counterclockwise to ON. This will let the air flow from the
tank and into the hose.
DO NOT OVER-INFLATE.
3.
Once the item is filled with the recommended maximum PSI level (125 PSI), remove
the air chuck from the item’s fill stem.
Note:
The tank pressure must exceed the pressure of the item you are filling. If not, the
tank will be unable to expel air. If this happens, increase the tank pressure and check that
the ON/OFF adjustment dial is fully open.
WARNING: Never fill the tank more than 125 PSI.
4.
When done, turn the adjustment dial to OFF. This will close the valve between the tank
and hose and keep air from leaking.
5.
If the tank will not be used for long periods of time, expel the air inside the tank and
hose. Store in a clean and dry location away from children.
OPERATION
FILLING THE TANK
Read the entire safety instructions before use.
1.
Fill the tank from a clean and dry compressed air source to the maximum 125 air
pressure. The best sources for compressed air are local full service gas stations or truck
stops.
2.
To fill, press the chuck of the compressed air source hose to the tank’s fill stem. While
filling, observe the pressure gauge.
DO NOT OVERFILL.
Keep filling until the pressure
gauge reads between 85 and 125 PSI (outer reading on gauge).
