Naterial KENTON 3276000323594, Assembly, Use, Maintenance Manual

Page: 53 / 55

7.TROUBLESHOOTING EN
PROBLEM/SOLUTION
The burners do not ignite with the ignition system
• The gas cylinder is empty ^

Replace with a full cylinder
• Faulty regulator

Check or replace the regulator
• Burners clogged

Clean the burners
• Gas hose or nozzles clogged

Clean the gas hose or nozzles
• The electrode cable is loose or disconnected from the electrode

Reconnect the cable
• The electrode or cable is damaged

Replace the electrode and the cable
• The integrated igniter is faulty

Replace it
• Incorrect electrode gap

The electrode must comply with the
burner, with a distance of 3 to 4 mm
between the end of the electrode and
the port on the burner. Realign the
electrode as required.
The burner does not ignite with a gas igniter
• The gas cylinder is empty ^

Replace with a full cylinder
• Faulty regulator

Check or replace the regulator
• Burners clogged

Clean the burners
• Gas hose or nozzles clogged

Clean the gas hose or nozzles
Small flame or flashback (flame in the burner tube, whistling or perceptible whirring)
• The gas cylinder is too small

Use a bigger cylinder
• Burners clogged

Clean the burners
• Gas hose or nozzles clogged

Clean the gas hose or nozzles
• Wind

Use the barbecue in an area that is less
exposed to wind
The gas valve knob is difficult to turn
• Integrated ignition system jammed ^

Replace the gas valve
• Gas valve jammed

Have your retailer replace the gas valve
Burners
50