21 - EOLIS Air Manager 600 600 S 1200 1200 S
ozone (or Active oxygen) = FeAtUre AvAilAble only on the model 600 S And 1200 S
the ozone feature is designed for deep cleaning (once a week, for example).
Ozone is a very powerful natural detergent, and like bleach or chloride, this feature must be used
with caution. Ozone is effective against embedded odours (even in bedding), dust mites, mould,
fungus, etc. to activate the OZONE feature, press the ON button. to deactivate it, press the OFF button.
When you press the OZONE icon, you can select which treatment mode to apply to your room:
oFF:
No ozone treatment.
mode 1:
Light treatment - small amount of ozone emitted
regularly (every 10 minutes). the room can be occupied during
the treatment. Determine the volume of the room to treat (m
3
:
L x W x h).
mode 2:
Curative treatment (deep clean) - strong dose of
ozone emitted at once. the room must be unoccupied for at
least 1 hour (no humans or animals present).
Sleep mode
Put your unit’s screen in sleep mode after 30 sec, 2 min, 5 min, or 15 min of inactivity. In sleep
mode, the screen goes dark, and lights back up when you press on it again.
Uv lAmp
to activate the UV LAMP feature, press the ON button. to deactivate it, press the OFF button.
With the photocatalytic filter, the UV lamps eliminate the VOCs present in glues, varnishes, paints,
furniture and household cleaning products. these lamps use a 240 nm light wavelength which
eliminates micro-organisms.
plAnner
to activate the PLANNER feature, press the ON button. to deactivate it, press the OFF button. to
customise the operation of your EOLIS Air Manager for the week, press the PLANNER icon. then
you can play with it:
this example shows that all thursdays, the unit operates as follows:
- From midnight to 6:00 a.m.: Operating in Active mode
- From 6:00 a.m. to 3:00 p.m.: Operating in speed 2
- From 3:00 p.m. to 8:00 p.m.: Operating in speed 1
- From 8:00 p.m. to midnight: Operating in night mode
If the planner is set to ON and no time slot is selected, your air purifier operates in ACtIV mode (default
mode).
