background image

 

 

 

 

4. Equipment overview 

 

The UV unit contains of:

  

 

CleanMove 8 for surface and air disinfection. 

 

 

4.1 Environment for the equipment  

 

4.1.1 Surface  

The installation must be placed on a flat surface without inclination and fastened according 

to the instructions. 

  

4.1.2. Placement  

The equipment may only be used in places where the surface is level and can be securely fastened.  

 

4.1.3 Temperature and humidity 

The equipment can be used in temperatures between 10-40°C and max. 60% humidity as standard. 

 

4.1.4. Storage and environment  

The equipment is not designed for outdoor use or storage.  

 

If the equipment comes into contact with saline or acidic moisture or liquid, this should be removed from the 

system as soon as possible to prevent corrosion.  

 

 

4.1.5. Requirement before use  

The equipment should be used as a disinfection solution with the purchaser: 

 

 

 

 

  The equipment must not be used until the system has been completely erected and installed 

in accordance with the regulations. 

 

 

  The equipment may only be operated by personnel who have been properly instructed in its 

use. 

 

 

  Repairs, service, and maintenance may only be carried out by qualified persons with proper 

training. 

 

 

  If constructive changes are made to the equipment, the CE marking will lapse. 

 

 

 

 

4.1.6 Disposal of parts

 

 

Consumables must be disposed of in accordance with current legislation.

 

 

 

UVC-

 

lamps contain mercury and must be disposed of in accordance with current regulations 

for lamps containing mercury.

 

 

 

4.2. Mounting instructions 

Installation of UV systems must be done according to specifications or further agreement.  

 

The UVC light is outside the visible spectrum and therefore bulbs should be replaced according to the 

following instructions. 

 

 

Installations with light 24/7 in normal temperature 

ranges  

Change after 14 months 

of continuous operation 

 

 

Installations with light 24/7 in temperatures 

>40C eller <10C  

Change after 12 months 

of continuous operation  

 

 

Installations with frequent switch on and off   

Max. 3000 on/off 

 

 

Installations with other type of use  

Max. 2 years from delivery date 

 

Avoid short-term (<5 min.) Switching on / off of bulbs. It has a strong degenerative effect on the life of the 

bulbs and is not covered by the warranty obligation. 

 

 

Summary of Contents for CleanMove 8















Reviews: