Page 12
Natcomm
SPECIFICATIONS
Dimensions (inches)
:
4.2 (W) x 4.2 (D) x 1.7 (H)
Dimensions (mm)
:
106 (W) x 106 (D) x 43 (H)
Weight
:
6 ounce or 170g
Power Supply
:
12V AC or 12V DC Power
Power Consumption
:
Idle - 0.5 W; Call – 0.75W
Line 1 Connector
:
RJ 11 6 pin (2 center)
Line 2 Connector
:
RJ 11 6 pin (2 center)
Device Connector
:
RJ 11 6 pin (2 center)
Power Connector
:
2.5mm barrel connector
FCC & IC COMPLIANT
:
Supplier Number NC
Ringer Equivalence Number
:
0.1 REN
WARRANTY
This device is guaranteed against defects from workmanship for a period of two
years (24 months) from the date of purchase.
In the event of a problem, please call ph 800 530 8645 for assistance and if
necessary, a Return Authorization. You should then return your unit, along with
the proof of purchase date, and a written statement about the nature of the
problem.
The Manufacturers obligation is solely to repair or the product. The product
may be replaced at the discretion of the Manufacturer. The warrantor is not
liable for any incidental or consequential damages due to such defects.
This Warranty shall not apply to any unit which has been subject to alteration,
modification, abuse, negligence, accident, external voltage/ lightning surge or
used in any manner contrary to these instructions.
The user is responsible for freight costs to the repair point. The warrantor will
be responsible for freight costs in returning this unit back to the user.
Damage caused to this device or attached equipment by lightning strikes or
over voltage surge is not covered under this warranty.
THE CASE IS SEALED AT THE FACTORY.
OPENING THE CASE WILL VOID THE WARRANTY.
