background image

Page 12 

   National Communications

SPECIFICATIONS

Dimensions

:

165w x 150d x 60h mm

Weight

:

415g

Power Supply

:

240VAC to 12VAC/1A

Power  Consumption :

Idle - 100mA

:

Operating - 230mA

Power Connector

:

2.5mm barrel connector

Network Connector

:

RJ 45 8 pin

Audio Output

:

2.5mm barrel connector

ACMA COMPLIANCE :

N 782

WARRANTY

This device is guaranteed against defects from workmanship for a  period
of two years (24 months) from the date of purchase. In the event of
failure, you should return the product, along with proof of purchase date,
and a written statement about the nature of  the problem.

This Warranty shall not apply to any unit which has been subject to
alteration, modification, abuse, negligence, accident, external voltage/
lightning surge or used in any manner contrary to these instructions.

The obligation is solely to repair or replace the product. The warrantor
is not liable for any incidental or consequential damages due to such
defects.

The user is responsible for freight costs to the repair point. The warrantor
will be responsible for freight costs in returning this unit back to the
user.

Damage caused to this device or attached equipment, by lightning strikes
or over voltage surge is not covered under this warranty.

CASE SEALED AT FACTORY

          OPENING THE CASE VOIDS THE WARRANTY

Summary of Contents for DME













Reviews: