Page 6 National Communications
EFT-POS OPERATION
Auto-Connect has a special facility which will allow an EFT-POS device to
be shared with any other device on an existing telephone line.
An EXCLUSION FACILITY is provided to ensure that the two attached
devices can not interfere with each other. This means that if one device is in
operation, the other device will not be able to access the telephone line
(‘Barge-In’).
The other device can be a Fax Machine, Modem or any other telephone
device using a dedicated line. The other device can also be one or more
telephones using an ordinary voice telephone line. In this situation, Barge-
In protection can only be provided when all telephones are connected direct
to the Primary Port of the unit. Technical installation may be required. Please
refer to the following table.
EFT-POS OPERATION
Dip Switch 1
EFT-POS fitted
Set to ON
EFT-POS not fitted
Set to OFF
PABX SYSTEM OPERATION
Auto-Connect can be used to connect an Answering Machine, Fax Ma-
chine, Modem, EFT-POS, Payphone, Automatic Dialler or ANY other
telephone device to ANY PABX, Commander or Multi Line Telephone
System.
This is done by connecting the Auto-Connect direct to an incoming
telephone line, prior to the system controller. A Telephone Technician will
connect the incoming line direct to the TELEPHONE LINE Port and then
connect the PRIMARY DEVICE port direct to the Primary Receiving Device.
The ACCESSORY DEVICE port will then be connected to the other device
(usually a Dial Out device only).
An EXCLUSION FACILITY is provided to ensure that the two attached
devices can not interfere with each other. This means that if one device is in
operation, the other device will not be able to access the telephone line
(‘Barge-In’). Technical installation is required. Please call (07)55965128 for
further details.